# Mystical Agriculture Infusion

## Infusion Changes

ATM9 adds **Mystical Agriculture Tiered Crystals** which, as the name suggests, adds tiered crystals. You must use a crystal of the same tier to upgrade to the next one (EX: You have to use an **Imperium Crystal** to craft **Supremium Essence**).

* **Master Infusion Crystals** now requires 4 ~~Supremium~~ Insanium.

## Farm Designs

### AlfredGG’s Farm

[BEST Mystical Agriculture Farm Design | All The Mods 8](https://www.youtube.com/watch?v=iLSlFHweJsI)

My Watering Can/Scythe isn’t working

**Mystical Agriculture** doesn’t allow fake players by default. The config can be changed in `config/mysticalagriculture-common.toml` -> `fakePlayerWatering = true`.

My Modular Routers aren’t working

You will need to add a **Security Upgrade** since you are working in a claimed chunk (even though it’s yours)

### KJM’s Full-Auto Phytogenic Insolator with AE2

![Full setup using all 32 channels of a dense cable per wall](/files/5fc5fba805599966b153f7ee4c0ed9f392b27144)

#### Requirements

Minimum Building Materials

* These materials set the ground work to build the full thing.
* 3x ME Interface
* 2x ME Storage Bus
* 2x Quartz Fiber or Cable Anchor
* 2x AE2 Crafting Card
* 2x Phytogenic Insolator
* 1x ME Controller
* 1x Pair of Quantum Rings
* 1x Sink/Eternal Water Block
* 1x of **any** colored cable *(Examples are using Magenta cables)*
* 2x of a **different** colored cable *(Examples are using Lime cables)*
* 8x of **another different** colored **Dense** cable *(Examples are using Orange dense cables)*

All Building Materials

* 129x ME Interfaces
* 2x ME Storage Bus
* 2x Quartz Fiber or Cable Anchor
* 128x AE2 Crafting Card
* 256x Phytogenic Insolator
* 1x ME Controller
* 1x Pair of Quantum Rings
* 1x Sink/Eternal Water Block
* 1x of **any** colored cable *(Examples are using Magenta cables)*
* 2x of a **different** colored cable *(Examples are using Lime cables)*
* 68x of **another different** colored **Dense** cable *(Examples are using Orange dense cables)*

Each image has a caption that shows when you click on it that you can read if you are stuck.

This farm requires a general understanding of **AE2** and **Thermal Series**

[Click here to view Kai’s AE2 guide!](broken://pages/565bd64bb2153dc268c5729d3d37070ad48bf08d#apotheosis)

#### The “Brain”

First we’ll build the “brain” of those whole system. You can place the brain above everything (like in the image above), underneath the floor, or anywhere else you see fit.

{% stepper %}
{% step %}

### Place the core components

Place a **Sink/Eternal Water Block** and an **ME Interface** on the corners of a **Quantum Ring** and then place **2x Quartz Fibers/Cable Anchors** on the Quantum Ring, between the Sink and ME Interface you just placed.

Then place your **2x colored cables** (Lime cables) on top of them along with an **ME Controller**.

The **1x colored cable** (Magenta cable) should connect the quantum ring and the ME Interface.

* Make sure to link your Quantum Rings.

![Make sure to put quartz fiber or cable anchors to isolate the Lime cable from your home AE2 system](/files/ed5d085da622ed81dc66fcbfb35dd03c21fb8c73)
{% endstep %}

{% step %}

### Add the storage buses

Place **2x ME Storage Bus** on the ME Interface and Sink, facing each other.

![ME Storage Bus on both the Sink and ME Interface](/files/b410af6177754bb73c9ed60c6107e497d6daa2e8)
{% endstep %}

{% step %}

### Configure the interface

Have the **ME Interface** stock **Water** and **Phyto-Gro** and set the priority to **-1**.

![ME Interface settings](/files/9448db0f83dfa5870cecfcabf721d49e5b9dd5cc)
{% endstep %}

{% step %}

### Configure the sink storage bus

For the **ME Storage Bus on the Sink** settings, have the **Input/Output Mode** to **Extract Only** and put **Water** in the filter by dragging it from JEI.

![Storage Bus on sink settings](/files/67c4019bf17011a858614a8738d728754852b45d)
{% endstep %}
{% endstepper %}

#### The Modules

Now we’ll build one of the “modules” that make up the entire thing. Each column of Phyto/Interface pairs is **8 blocks tall** since an AE2 subnet without a controller only has 8 channels. Each wall will use all 32 channels of a dense cable.

{% stepper %}
{% step %}

### Build the module shape

Each module consists of **2 Phytos** next to each other and an **ME Interface** on each side.

![](/files/8199df2bc00c3556fc8f3a23709f4982a50b0161)

If you build the full size farm, the corners will look like this. One of the Phytos will move 90° to one side depending on which corner it’s on.

![](/files/6785a112822031684b53bb0af70e505a2d2ca7d3)
{% endstep %}

{% step %}

### Configure the interface

For the **ME Interface**, put a **Crafting Card** in and set **Water** and **Phyto-Gro** in the filter by dragging it from JEI.

![](/files/1a6f85c60fb58fe541de8f9f6c4ea25944c92f56)
{% endstep %}

{% step %}

### Configure the phytos

For the Phytos it’ll be slightly different depending on which side the ME Interface is on. You will have it **Auto Input/Output** the side touching the interface. The image below is for a phyto with an interface to the left.

![](/files/3b110a4e5307554891edd524431d13ee4d71cad9)
{% endstep %}

{% step %}

### Add augments

Each Phyto will have **1x Abyssal Integral Component & 3x Abyssal Flux Linkages**. This combination provides maximum efficiency, of course you can put the lower tier ones in as you are working up to these.

![](/files/47af7da0980487c91f4cdedb312b137219eb0600)
{% endstep %}
{% endstepper %}

You’ll stack these modules to a **maximum of 8 tall** and arrange them into 4 walls.

Tips

* Use an AE2 **Memory Card** to copy **ME Interface** settings (`Shift + R-Click` to **Copy**, `R-Click` to **Paste**)
* Use **Redprint** to copy **Phytogenic Insolator** settings (`R-Click` to **Copy** and to **Paste**)

#### Connecting and Powering

You’ll put your **Colored Dense Cables** in this arrangement, each dense cable branch connects 4 colums of interfaces. You can use whatever energy pipe you want to power the phytos.

![](/files/888b0b4a5b47e7ed93bc42243f244730eaa641c7)

> Mystical Agriculture | [CurseForge](https://legacy.curseforge.com/minecraft/mc-mods/mystical-agriculture)


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://allthemods.gitbook.io/guides/all-the-mods-9/mystical-agriculture-infusion.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.